Posts Tagged ‘Plumbing Repair’

Repairing Common Boise Sump Pump Problems

Monday, April 2nd, 2012

Your Boise sump pump is an important piece of equipment that pumps out excess groundwater, which prevents flooding hazards in basements and water damage to your home. If the pump stops working or won’t shut off, you can usually solve the issue yourself. During times of heavy rain and potential flooding, it’s best to check your pump on a daily basis to make sure it’s running properly.

You can maintain your pump by having it inspected by a professional Boise plumber, and keeping the pump clean and the well free of debris. Feel free to call Wickstrom Plumbing, Heating & Cooling if you have questions about how to maintain a sump pump, or to make an appointment for an annual inspection and professional cleaning.

Most issues can be repaired easily and without the help of a plumber. Here’s a troubleshooting guide to help you solve minor issues with your pump.

Check for Electrical Problems

Always check to make sure the sump pump is fully plugged in and that there aren’t any fuses that have burned out. If there is standing water in the basement, you should take extra precautions when handling any electrical equipment, even a plug. Call a plumber or electrician for advice if you have any safety concerns.

Check the Float Switch

Just like the float in a toilet tank, the float attached to the side of your sump pump acts as a guide for turning the pump on and off. This is called the float switch, and it usually has a large bulb or other floatation device attached to a metal arm. This float detects the water level inside the well, and it turns the pump on when the water reaches a certain height in the well.

If the pump is plugged in and there are no blown circuits, move the float switch up and down to see if it will turn the pump on. Debris can get trapped underneath the float causing it to stick. If the motor is constantly running, this switch may be stuck in the “on” position if debris is lodged underneath it, or if there’s substantial corrosion.

You can actually move the entire pump around to change the position if there’s no apparent debris causing the issue. Sometimes the pump gets shifted around slightly, and the float switch cannot work properly if the pump isn’t plumb or level. Be careful not to move it too much, since it could damage the drain line attached to the pump motor.

If your motor is constantly running, and none of these steps work, the motor could overheat and stop working. Unplug the pump while you’re investigating the problem, and if none of these steps work, call a professional plumber.

Check for Clogged Filters

In addition to causing issues with the float switch, debris trapped in the screen can also cause the motor to overheat or shut down. If your filter is dirty, try to get out as much of the debris as possible, but if this doesn’t solve the issue, you could have a clogged drain line. In this case, you will need to call a professional plumber to snake out the line.

Preventative Maintenance Tips

You can prevent issues with the sump pump in your Boise home with a few preventative maintenance tasks. Keep debris from falling into the well as much as possible, and clean out any particles that could clog the screen or affect the operation of the float switch. Occasionally inspect the pump and well for any corrosion or other concerns. If you are comfortable with the operation of your pump, drain and clean the entire well and pump at least once a year.

Lastly, call a qualified technician at Wickstrom Plumbing, Heating & Cooling for a yearly sump pump maintenance visit.

 

Tags: , , , ,
Posted in Plumbing | Comments Off

Quail Ridge Plumbing Guide: Causes of Common Plumbing Disasters

Monday, January 9th, 2012

What are some of the costliest repairs in your Quail Ridge home? Costly can be characterized by lost money or lost time – or both. You may have experienced some of these so-called “disasters” and wondered what you could have done to prevent them. In particular, let’s talk about disasters of the wet variety – plumbing problems.

It goes without saying that nothing is built to last. Parts and products will eventually wear out and need to be repaired or replaced. But the rate of repair or replacement has a lot to do with how well things are maintained, especially common plumbing fixtures and appliances in the home. In order to identify some of the disasters caused by plumbing fixtures and appliances, let’s identify the source of the problems – and their location in the home.

We spend a lot of time in the bathroom so let’s start there first. What disasters happen in the bathroom? At least three come to mind: running toilet, leaking shower head, and clogged sink (also found in the kitchen so let’s kill two birds with one stone here). First, the toilet.

A running toilet is annoying and wastes several gallons of water by the hour. It is often caused by a defective flapper inside the tank, not properly sealed and causing water to leak from the tank. Next, the shower head. Leaks often occur when something as simple as a small rubber washer is worn out, breaking the seal and allowing water to leak. Lastly, the clogged sink. The most common culprit of a clogged sink is something that will not decompose or wash away, namely human hair, bits of plastic or fingernails, etc.

All of these bathroom backups can cause extensive water damage to walls or floors. In the most severe cases, a bathroom’s structure can be compromised by something as small as a dripping faucet – if left unchecked over time.

The next place we spend a lot of time is in the kitchen, another prime area for plumbing disasters. Two appliances that drive homeowners nuts (when malfunctioning) are garbage disposals and refrigerator ice makers.

First of all, garbage disposals are not made to dispose of everything. Utensils, plastics, bones and other goodies do not grind up but rather, bind up a disposal. A backed up disposal can shut down the sink drain and spill over its top. Just as annoying is a refrigerator icemaker, which depends on a plastic or copper tube for its water source. A break in the tube or crimp in the copper line can back up the water and cause a major leak behind or below the refrigerator. And like the bathrooms disasters, damaged flooring and walls can be the result.

Maybe the biggest plumbing disaster of all comes from something unseen by the naked eye: frozen water pipes in crawl spaces or attics. Water pipes in uninsulated areas can freeze when outside temperatures fall below the freezing mark. Often, homeowners are unaware of the problem because they are away from the home for extended periods of time or have failed to properly insulate pipes, crawl spaces, or attics. Frozen pipes can burst, causing extensive damage and lead to an even more dangerous situation: mold growth.

How can you avoid common disasters? Make sure your fixtures and appliances are maintained and if needed, serviced by a professional Quail Ridge plumber. You may also want your plumber to give you a whole-house inspection, which can pinpoint potential trouble spots where your next plumbing disaster might be brewing.

Tags: , , , ,
Posted in Plumbing | Comments Off

Harris Ranch Plumbing Tip: How to Increase Your Water Pressure

Friday, January 6th, 2012

It’s no fun when you are in the middle of taking a shower in your Harris Ranch home and the stream of water slows to a trickle. The most logical thing to blame the loss of water pressure is a toilet being flushed or a washing machine being filled. It is not uncommon for losses in water pressure to be associated with simultaneous water usage in other parts of the home.

But if low water pressure seems to be a constant problem when only one source is being used and there are no other appliances using water at the same time, you may have a bigger problem on your hands.

The first thing to do is to check the source of the water supply to your outdoor faucets. Turn the hose bibs to the fully open position and run the water. Is the pressure okay? If so, you probably have a problem indoors. While you are outside, check for any leaks in the hose bibs or faucets. A leak can cause a loss of water pressure in other plumbing circuits.

Now check the hose bibs on the lines leading to interior fittings, like faucets or showerheads, etc. Is the hose bib turned to the fully open position? Someone may have been playing with the bib and turned it down or off. If that checks out okay, take a look at all of the fittings in your plumbing fixtures. Are there any leaks? Is there standing water anywhere, indicating a leak?

If so, tighten up the affected fittings. If you need to remove any fittings to inspect or replace (i.e. a worn out washer or bushing), make sure you turn off the water supply to the fitting first.

If there are filter screens in your faucets check them for an accumulation of debris and clean if necessary. A clogged screen can greatly reduce water pressure.

Many new homes now come with a pressure regulator, which governs the water pressure going into the home. The regulator is located above ground, usually where the pipes enter the home. The pressures are usually preset by the regulator manufacturer but may not always be compatible to the local environment. If you think that may be the problem, contact a local plumbing professional for an opinion.

A disruption in the piping that feeds water into the home can also affect water pressure, such as tree roots in the pipes or a break in the line. These problems can only be diagnosed and corrected by qualified Harris Ranch plumbing professionals. Please do not attempt to find and fix these problems as the result may be costly or even dangerous to your health.

Low water pressure can be a drag but it may also only require a quick fix.

Tags: , , , , ,
Posted in Plumbing | Comments Off

Troubleshooting Highlands Drain Problems

Monday, January 2nd, 2012

It’s Saturday afternoon and you are preparing dinner for a number of guests.  Your Highlands home’s kitchen is packed with groceries and you start to clean a lot of veggies for dipping. But there is a problem. The drain in your kitchen sink is “acting funny.” It drains slowly and is making a gurgling sound. In fact, it’s beginning to smelly funny, too.

The timing couldn’t be worse. Before you hit the panic button, let’s take a moment to troubleshoot the problem. Maybe it isn’t much of a problem after all.

First of all, is the problem confined to just the kitchen sink? There may be similar problems in other sinks, which would indicate a larger problem with the plumbing in your Highlands home. Hopefully, the kitchen sink is the only area you need to be concerned with.

Next, if you have a two-basin sink who should check to see if both sides are clogged or just one. Remove all dishes and utensils and run water on both sides. If water drains from one and not the other, there is a clog somewhere in the pipe leading to the union of both pipes. You have now centralized the drain problem. If both sides back up, the clog is further down the pipe. But it is still not a big problem.

One way to troubleshoot for drain problems is to simply run very hot water down the drain. This tends to break up clogs of grease by melting it away. The fix can also be as simple as running the garbage disposal long enough to dislodge any debris. You may even want to grind up some food you were planning to dispose of or take some lettuce greens and use the disposal on them. If this food takes a long time to grind or doesn’t at all, the disposal may be the culprit, leading to blocked drains.

And if you are preparing for your party by taking a shower and the shower drain is acting funny, don’t hit the panic button just yet. You may just have a build-up of hair or skin on the drain cover or screen. Use you foot to swish around the water and if water drains more quickly when you do this, the fix can be as simple as reaching down and picking up the debris. Having a plunger nearby helps, too.

None of this is brain surgery and quick fixes are easy to do. But if the problem persists and you don’t have the time or patience to work on your drain problem, call a Highlands plumbing professional – and stick with your party plans.

Tags: , , , , , ,
Posted in Plumbing | Comments Off

Homedale Plumbing Repair Tip: The Technology of Video Pipe Inspection

Monday, December 26th, 2011

Let’s face it – technology is the answer for everything in Homedale. If it’s mechanical, it has been affected by technology. The world of plumbing is no exception. Technology now makes it possible for people to look inside the piping in their home – to get the “inside story” on why a pipe is blocked up or why water is flowing too slowly. A trained expert can use video pipe inspection technology to quickly diagnose a problem in order to find a solution.

So what types of technology are available today? Before we get to that, remember that technology is fluent. By the time you read this blog there may be something new to make this material outdated. The best way to keep up with the latest technology of video pipe inspection is to talk to your local plumbing professionals and check out updates on the Web.

The technology you will see in your home can be viewed live or via digital recording. The camera and its scope can grab a birds-eye view of the pipe without the need to unscrew fittings and elbows and without having to make a mess of things.

Plumbers making a service call who use video inspection will usually show homeowners some live pictures from inside their pipes or use a digital reproduction in their sales presentation. In either case, the camera doesn’t lie and repairs are quickly supported by video evidence.

Here are some of the components involved in the technology of video pipe inspection. First and foremost is the camera itself, which usually will have high definition image display, recording, and playback capabilities. Images can be stored on flash cards for downloading onto other computers or to the Web. The lens of the camera is mounted into the head of the scope, which could be made of fiber optic or fiberglass material. The scope or “snake” comes in a variety of lengths. Images from the camera can viewed on monitors of various sizes in color or black-and-white.

Other options may include audio capabilities for a plumbing professional to record what the camera sees and explain the problems and solutions to homeowners via voiceover technology.

According to one plumber who utilizes this type of technology, video pipe inspection provides “an assessment of pipe’s structural integrity, detection of blockages, breaks or defects, still image/video footage for client use, and first-time mapping or updates.”

If you want to utilize the latest technology to diagnose pluming problems in your home, call your local plumbing professional and ask for a video pipe inspection.

Tags: , , , , ,
Posted in Plumbing | Comments Off

Sand Hollow Plumber Tip: What to Look for When You Have Water Damage

Friday, December 16th, 2011

While water is an essential for life, it brings a high price tag when gone unchecked and allowed to seep, leak, and drain into your Sand Hollow home. Damage caused by water can cause structural damage to a building and destruction of its contents. When left unchecked – over time – water damage can lead to mold growth and have a serious affect on building occupants’ health.

The destructive forces of water leave telltale signs throughout a building. Let’s look at some.

  • Wood damage – water can saturate wood, causing it to rot and decay. Check for discolored wood around plumbing fixtures, a sure sign of an ongoing or older leak that has since been repaired. Just because a leak has been fixed, the after-effects can linger. Soft or uneven surfaces around a plumbing fixture are a sure indication of water damage. Pull back carpeting, pads, tiling, or flooring to get to the root of the problem.
  • Drywall damage – porous material like drywall can leave many signs of water damage and, like wood, can be seriously degraded by water damage. Check for discoloration around plumbing fixtures and soft spots. Don’t assume that a dry surface that is stained is not a structural problem. You may have to cut out the drywall to reach the true source of the water damage.
  • Ceiling tile stains – a sure sign that water is coming in from a source above a roof or ceiling. Ceiling tiles are a porous material that are great for showing every little bit of moisture or water that comes in contact with them. The same is true with plaster or drywall ceilings. Stains indicate a more serious problem and should be investigated right away.
  • Damp, musty smells – water can leave some unpleasant odors, especially untreated water. Leaks or standing water are a source for higher humidity levels in a home. If you are standing in an area where water has soaked into floors or walls, there is often a damp, humid smell. Don’t mistake it for high humidity levels in the home. The smell can come from hidden sources like a leaking pipe joint or broken valve behind an access door.
  • Mold build-up – wood and drywall surfaces provide great food for mold growth when saturated with water. The mold can be of a harmless nature but often can become dangerous black mold. When black mold spores are airborne they can cause respiratory problems and even worse, medial problems down the road. Look for unusual clusters of mold in damp areas and if you find some, immediately call a professional plumber to suggest clean-up and to repair the source of the water leak.

There are many signs of water leakage in the home, caused by leaking or broken pipes, dripping faucets from worn-out washers, cracks in the walls and foundations allowing ground and rain water to seep in, etc. Find and fix the source immediately or pay even higher costs in repair and medical bills later on.

Tags: , , , , ,
Posted in Plumbing | Comments Off

Emergency Plumbing Tips from Roswell

Wednesday, November 23rd, 2011

When you have a plumbing emergency in your Roswell home, the last thing you want to do is make the problem worse, but if you don’t act fast, that’s exactly what might happen. To help you take the right actions and avoid the wrong ones, here are some quick tips for how to handle a plumbing emergency.

  • Shutting Off the Water – If a pipe bursts or you have standing water somewhere, the very first step you take is to shut off the water. Cleanup is pointless if more water pours in. So, we need to stop the flow. Usually, this water valve is located outside, but it can be found under an access panel or in the basement in some cases.
  • Flooding Toilet – Watching the water slowly rise in a toilet, dangerously close to the rim, can be scary. But, there are tricks to slow or stop the flow until the plumber arrives. The first is to turn on your sink faucet to slow down the water flow to the toilet. If you can reach it, turn off the cold water supply to your toilet as well. As soon as the tank is empty, no new water will enter.
  • Turning Off an Appliance – Sometimes the problem isn’t a house-wide problem but a specific appliance overflowing. If your washing machine or dishwasher is about to overflow, turn off the supply valve immediately. It could be several gallons of water per minute if you don’t.
  • When Electricity is Involved – If your basement floods, don’t go down there until you can be sure there is no electricity flowing into the water. That much water with live electricity is incredibly dangerous. If you can’t be sure, get a plumber out there fast.
  • Gas Leaks – Sometimes, a plumbing problem is really a gas problem. If this is the case, don’t try to fix it yourself. Get everyone out of the house and call the gas company immediately.
  • Hot Water Leakage – If you notice that hot water is leaking somewhere in your home, turn off the main water supply and then turn off the hot water heater’s energy source. There should be an emergency shutoff valve on the hot water heater for gas and a switch on the device if it is electric.

In each of these cases, the very next step you take should be to call a professional, but if you act fast you can hopefully mitigate the damage.

Tags: , , , , ,
Posted in Plumbing | Comments Off

How to Unclog a Kitchen Sink: A Guide from a Wilder Plumber

Monday, November 21st, 2011

There are lots of reasons why your Wilder home’s kitchen sink can clog. And in order to unclog the sink, it is important to know why it clogged up in the first place. It is easy to suggest a simple solution but the “one size fits all” philosophy doesn’t always work.

As simple as it sounds, you don’t want to use a grease dissolving agent on a clog caused by a fork that is stuck sideways in a pipe. You also don’t want to mess around with the plumbing if the solution is as simple as using a snake or pouring some dissolver down the drain. If the clog is obvious you can save yourself a lot of time and effort.

If the drain is clogged, the easiest thing to do is to operate the garbage disposal, provided it is tied into the drain. But you don’t want to turn on the disposal until you have checked for obstructions in the drain, namely utensils. Remove any utensils before turning on the garbage disposal. Sometimes even the smallest amount of debris can stop up a drain and a simple flip of the disposal switch clears it away.

If that solution doesn’t work you may want to do the following procedures – in order – to unclog the drain.

  • Run extremely hot water in the sink. This can sometimes dissolve whatever is clogging the drain by breaking down the debris.
  • Use a plunger. A blast of forced air from a plunger can often do the trick. If the clogged drain is connected by pipe to another drain (a sink with two basins), you would need to plug the other drain when plunging. Forced air will find the least path of resistance and may bypass the clog and exit out another opening.
  • Use a liquid or granulated dissolver, poured directly into the clogged drain. There are many products on the market for this task. Make sure you read the instructions carefully before dumping chemicals into your drain.
  • Snake out the pipes. Stubborn clogs that are resistant to the above solutions may require that you use a hand-held or portable snake in the pipes leading to the drain. Again, read the instructions on how to operate the snake in order to avoid damage to the pipes, drain, or yourself!
  • If the clog persists, there may be a bigger problem going on. At this point you have to ask yourself if you feel comfortable taking the plumbing apart to find the cause of the clog. There could be other more serious problems going on further down the plumbing circuit, i.e. roots in the pipes.

You may require the help of a plumbing professional. You have to ask yourself if you have the time and the knowledge to disassemble your drain and pipes. It may cost you more in the long run if you damage any parts during the procedure or create other “add-on” problems.

Remember to try the easiest solutions first and if you are still unable to unclog your drain, call a qualified Wilder plumber who will safe you time and peace of mind.

Tags: , , , , ,
Posted in Plumbing | Comments Off

The Do’s and Don’ts of Clogged Drains: A Tip From Notus

Wednesday, September 14th, 2011

Clogged and slow drains can be a real bummer in your Notus home. Water standing in the kitchen sink is gross, and no one likes to shower with the tub gradually filling around their feet. Calling a plumber when the clog gets out of hand is easy enough, but it’s time consuming. Plus, it means having to do without whatever water source that drain is involved with until a plumber can get there to fix it, which can sometimes mean hours or even days.

The best solution, then, is to prevent clogs from forming. With proper use, some brief regular maintenance and a few tricks, most clogs can be stopped dead in their tracks before becoming a problem. Follow these guidelines and you will not need to bother your plumber over a simple clogged drain.

Don’ts

First of all, there are some things you just shouldn’t do to your drains and pipes. These things can quickly lead to clog buildup, so avoid them:

  • Don’t pour liquid grease, such as bacon grease, down drains. It can solidify in the pipes and cause a clog.
  • Don’t flush anything down the toilet that is not designed to be flushed.
  • Avoid using bleach or other chemicals to clean tubs, sinks and drains. Particles from these cleansers can build up to cause clogs, or even erode pipes.

Do’s

Even with best practices, no drain will remain completely clean. However, a little proactivity can stop everyday residue from accumulating and forming a nasty clog. Try some of these maintenance tips to keep things running smoothly:

  • Use a screen, guard or trap. These can catch food, hair and other debris which would otherwise wind up sitting in your pipes.
  • Clean sink and drain stoppers regularly. Debris can get trapped on and under the stoppers, just waiting to break loose and cruise into the drain to cause a clog.
  • A few times a year, stop up your sinks and tub, fill them up all the way, then let them drain. The pressure and volume of the water will help shake loose deposits in the pipes.
  • Once a month or so, carefully pour boiling water down the drain to dislodge stubborn deposits. You can also do this any time you notice a drain is starting to run slow. Vinegar is also effective.

It really can be as simple as that to keep your drains clear and avoid using nasty chemicals or calling your plumber in an emergency.

Tags: , , , ,
Posted in Plumbing | Comments Off

How to Use a Plumber’s Snake: Guide From Emmett

Monday, September 12th, 2011

Your kitchen sink  in your Emmett home is backed up and you can’t prepare dinner. Or your toilet is plugged and even the plunger isn’t fixing the problem. It may be time to call for the snake – plumber’s snake that is.

For those of you who are intimidated by tools, take note: you have nothing to fear from a plumber’s snake. It is easy to operate and is an effective alternative to professional plumbing repairs.

Okay, so you’ve decided to use a snake to unclog your pipe. Do you have one? If you rarely use a snake in your home you might want to consider renting one. Most tool rental shops have snakes in varying sizes for rent – from hand-held to electric. But it is a good idea to have one around for emergencies and you can find hand-held snakes for under $10 (often named “augers”).

The first thing you need to do is prep for the job. Make sure you have cleared out an area to work on the plumbing and that you have plenty of rags to mop up any spills or drips. It is a good idea to lay down some newspaper or plastic to keep the floor and cabinets dry, too.

Make sure you have access to the pipe by removing any drain covering. Obviously you will have directly access to the toilet drain. Before operating the snake you should put on a pair of rubber gloves to protect your hands from the metal coils of the snake and any debris that might be in the pipe.

Next, slowly feed the snake into the pipe. You may have to turn the snake in a clockwise direction to move it along. Once you have reached the clog – and you can usually tell when the snake stops feeding – it is time to rotate the snake into the clog and loosen it up. The head or tip of snake should be able to grab on the debris so that you can pull it back out and dispose of it. In the process, some of the debris may wash away down the pipe and that’s okay (well, as long as it doesn’t accumulate further down the circuit). You really want to use the snake head to “chew up” the debris for removal, rather than just pushing it further down the pipe.

Once you have removed the debris clogging the pipe, run hot water down the pipes to wash away any remnants. Replace the drain cover if necessary and clean up your mess. Voila!

If you have a stubborn clog that won’t snake out or if you just aren’t comfortable using this tool, call a professional plumber to save you the effort.

Tags: , , , ,
Posted in Plumbing | Comments Off