Posts Tagged ‘Kuna’

Troubleshooting Highlands Drain Problems

Monday, January 2nd, 2012

It’s Saturday afternoon and you are preparing dinner for a number of guests.  Your Highlands home’s kitchen is packed with groceries and you start to clean a lot of veggies for dipping. But there is a problem. The drain in your kitchen sink is “acting funny.” It drains slowly and is making a gurgling sound. In fact, it’s beginning to smelly funny, too.

The timing couldn’t be worse. Before you hit the panic button, let’s take a moment to troubleshoot the problem. Maybe it isn’t much of a problem after all.

First of all, is the problem confined to just the kitchen sink? There may be similar problems in other sinks, which would indicate a larger problem with the plumbing in your Highlands home. Hopefully, the kitchen sink is the only area you need to be concerned with.

Next, if you have a two-basin sink who should check to see if both sides are clogged or just one. Remove all dishes and utensils and run water on both sides. If water drains from one and not the other, there is a clog somewhere in the pipe leading to the union of both pipes. You have now centralized the drain problem. If both sides back up, the clog is further down the pipe. But it is still not a big problem.

One way to troubleshoot for drain problems is to simply run very hot water down the drain. This tends to break up clogs of grease by melting it away. The fix can also be as simple as running the garbage disposal long enough to dislodge any debris. You may even want to grind up some food you were planning to dispose of or take some lettuce greens and use the disposal on them. If this food takes a long time to grind or doesn’t at all, the disposal may be the culprit, leading to blocked drains.

And if you are preparing for your party by taking a shower and the shower drain is acting funny, don’t hit the panic button just yet. You may just have a build-up of hair or skin on the drain cover or screen. Use you foot to swish around the water and if water drains more quickly when you do this, the fix can be as simple as reaching down and picking up the debris. Having a plunger nearby helps, too.

None of this is brain surgery and quick fixes are easy to do. But if the problem persists and you don’t have the time or patience to work on your drain problem, call a Highlands plumbing professional – and stick with your party plans.

Tags: , , , , , ,
Posted in Plumbing | Comments Off

A Question from Kuna: What Is AFUE and Why Should I Care?

Monday, December 5th, 2011

If you’ve been shopping for a furnace in Kuna, chances are you’ve noticed that each furnace has its own annual fuel utilization efficiency (AFUE) rating. These generally range from 80% to the high 90% s and the higher the number, the more fuel efficient that particular furnace is.

But what does this number really mean and just how much should you care? Well, the AFUE rating should actually have a significant impact on your furnace purchasing decision, but that doesn’t mean that you’ll always choose the furnace with the highest efficiency rating either.

For one thing, you’ll have to recognize that not every type of furnace is capable of running at the highest efficiency levels. Oil furnaces, for instance, can’t compete with the super high efficiency gas furnaces on the market today. That’s not to say that an oil furnace might not be the best choice for you under certain circumstances, but it does mean that you should take a close look at your furnace usage before you make a decision.

If you do choose a gas furnace, you will of course have the option of getting one that can reach up to 97% or so efficiency. However, that may not always be the best choice either. If you live in a place where with very harsh, long winters and you’re going to be using your furnace heavily, then it’s definitely worth investing in a higher AFUE furnace that can save you considerable amounts on your monthly heating bills.

But if you don’t use your furnace too often as your area has more mild winters it’s probably not worth it for you to invest in such a high efficiency product. That’s because the higher the AFUE of the furnace, the more expensive it is to purchase and install. Certainly you’ll save money every month because you’ll be getting more heat out of the fuel you’re paying for. But if you don’t use your furnace all that much, the savings really won’t be that substantial.

Don’t forget that a furnace with an 80% AFUE rating is still quite energy efficient.

Tags: , , , , ,
Posted in Heating | Comments Off

Emergency Plumbing Tips from Roswell

Wednesday, November 23rd, 2011

When you have a plumbing emergency in your Roswell home, the last thing you want to do is make the problem worse, but if you don’t act fast, that’s exactly what might happen. To help you take the right actions and avoid the wrong ones, here are some quick tips for how to handle a plumbing emergency.

  • Shutting Off the Water – If a pipe bursts or you have standing water somewhere, the very first step you take is to shut off the water. Cleanup is pointless if more water pours in. So, we need to stop the flow. Usually, this water valve is located outside, but it can be found under an access panel or in the basement in some cases.
  • Flooding Toilet – Watching the water slowly rise in a toilet, dangerously close to the rim, can be scary. But, there are tricks to slow or stop the flow until the plumber arrives. The first is to turn on your sink faucet to slow down the water flow to the toilet. If you can reach it, turn off the cold water supply to your toilet as well. As soon as the tank is empty, no new water will enter.
  • Turning Off an Appliance – Sometimes the problem isn’t a house-wide problem but a specific appliance overflowing. If your washing machine or dishwasher is about to overflow, turn off the supply valve immediately. It could be several gallons of water per minute if you don’t.
  • When Electricity is Involved – If your basement floods, don’t go down there until you can be sure there is no electricity flowing into the water. That much water with live electricity is incredibly dangerous. If you can’t be sure, get a plumber out there fast.
  • Gas Leaks – Sometimes, a plumbing problem is really a gas problem. If this is the case, don’t try to fix it yourself. Get everyone out of the house and call the gas company immediately.
  • Hot Water Leakage – If you notice that hot water is leaking somewhere in your home, turn off the main water supply and then turn off the hot water heater’s energy source. There should be an emergency shutoff valve on the hot water heater for gas and a switch on the device if it is electric.

In each of these cases, the very next step you take should be to call a professional, but if you act fast you can hopefully mitigate the damage.

Tags: , , , , ,
Posted in Plumbing | Comments Off

Ultra Violet Lighting: A Guide From Collister

Monday, September 19th, 2011

With a state of the art home comfort system in place, complimented by a high tech indoor air cleaner, you may think you’re set to take on climate and contaminant related challenges to your Collister home’s air quality. But you’re probably missing one thing, and that’s the ability to remove living contaminants like bacteria and viruses from your indoor air.

Unlike non-living particulate indoor air contaminants, bacteria and viruses are not easily caught by indoor air filters or ionizers. They often slip through and continue to circulate again and again through your home, greatly increasing the likelihood that you and your family will get sick. They also tend to reproduce, so the longer you go without eliminating these germs, the more of them there will be.

Killing those Germs for Good

Fortunately there is a technological solution to this indoor air quality problem. The inclusion of ultra violet lights into your air purification system not only specifically targets bacteria and viruses; it helps to slow the spread of disease when someone in your home gets sick.

UV germicidal lights are extremely effective at removing all types of living contaminants from your indoor air. Unlike HEPA filters and air ionizers, UV germicidal lights don’t try to remove these contaminants by trapping them. Instead, they kill them outright, making sure that the germs can’t stick around to reproduce or work their way free of the containment system.

Installation and Maintenance

For most indoor air contaminants, you want to have someone test your air first. However, with bacteria and viruses, you can rest assured that they are always in the air around you. It often only takes a smaller number of pathogens to make someone ill.

Most UV germicidal lights are easy to integrate into your existing indoor air cleaning system. They are usually installed just past the filters so they can catch the germs without other indoor air contaminants getting in the way. And best of all, UV germicidal lights require very little attention or maintenance.

Simply put them in place and let them do their work. You should schedule a routine maintenance visit every so often to make sure that no part of your indoor air cleaning system needs to be repaired or replaced. But other than that, installing UV germicidal lights in your home allows you to relax and enjoy a completely contaminant free living environment.

Tags: , , , ,
Posted in Indoor Air Quality | Comments Off

Turn that Thermostat Down a Degree and Save Money: Some Pointers From Kuna

Friday, September 16th, 2011

There are literally dozens of things you can do to cut back on your heating (and cooling) costs in your Kuna home . These range from things like getting a high energy efficiency system to just making sure that you have adequate insulation in all parts of your house. But too many people overlook one of the simplest things that you can do to cut down on your monthly heating bill, and that is to turn the thermostat down.

Of course, you did not pay for that high tech home comfort system just so that you could walk around cold all winter long. You certainly want to keep your house at a temperature that is comfortable, but what does that really mean?

The normal default setting for a home heating system is usually somewhere between 72°F and 75°F. If you have your thermostat set somewhere in this range in the winter, you are probably quite comfortable indoors. In fact, you might not even need a sweater. But would you really notice if it was a degree or two cooler? Would it be incredibly inconvenient to put on a sweater or sweatshirt after all?

The truth is that most of us will be just as comfortable at 69°F as we are at 72°F, and the effect that small adjustment can have on your heating bill is actually pretty significant. In fact, you will save an average of 3% on your monthly bill for every degree you turn your thermostat down. Drop the temperature down by three or four degrees and that will give you up to a 10% monthly savings – hardly something to turn up your nose at.

And setting the regular temperature in your house a bit lower is not the only way your thermostat settings can save you money. You will also save quite a bit if you take the time to turn down the temperature when you leave the house and when you go to bed at night. There simply is no reason to pay to heat your house when you are not there and you will certainly be rewarded with a lower energy bill for your efforts.

Tags: , , , , , ,
Posted in Heating | Comments Off

The Energy Efficiency Rating of Central Air Conditioners: What Is it and Why Is it Important in Dry Creek?

Friday, September 9th, 2011

When you are shopping for a central air conditioning system in Dry Creek, you will have to evaluate your options based on a number of different factors. For instance, you will need to decide which type of system is the best match for your home and for your particular cooling needs. It is also important to make sure that the central air conditioner you choose is the right size for the cooling load it will have to take on.

However, it is also very important to evaluate your central air conditioning options based on how energy efficient they are. This will have a great deal to do with how much you pay in terms of cooling costs each month, which makes it easy to see why you should take it into account before you make a purchase.

The energy efficiency of a central air conditioner is generally expressed as a seasonal energy efficiency rating, or SEER. The SEER numbers you will typically find on the latest air conditioning systems range from eight to 19.5 with the higher numbers signifying a more energy efficient model.

So it is pretty easy to figure out that a central air conditioner with a higher SEER will save you some money monthly because it will use less energy to get the same job done. But central air conditioners with high SEERs also typically have high price tags. So to determine how high of a SEER you need, you will need to know more exactly how much more money you will save as you move up in the rankings.

You can do this by comparing the SEER of the system you currently use with the new system you are considering and compare how much your current energy usage would cost you with each model. Basically, you want to pick a central air conditioner that will save you enough to offset the purchase price of the unit.

Often, this means that you will be best off with a SEER 14 or SEER 16 because these units save you a considerable amount over older models without carrying too high a purchase price. However, the amount you save will be directly related to how much you use your central air conditioning system, so if you live someplace that is extremely hot for a large chunk of the year, it may be worth it for you to buy a very high efficiency air conditioning system. If you need more information to decide which type of air conditioner is right for you, contact your local HVAC professional.

Tags: , , , , ,
Posted in Air Conditioning | Comments Off