Posts Tagged ‘Boise County’

How Often Should I Have My Geothermal System Checked? A Question from Boise Bench

Wednesday, October 19th, 2011

The beauty of having a geothermal system in your Boise Bench home is that it requires very little maintenance. They have fewer mechanical components are than other heating systems – and most of these components are underground or inside, shielded from the outdoor elements. The underground tubing usually is guaranteed to last 25-50 years and inside components are easily accessible for servicing.

Nonetheless, keeping a geothermal system working at peak efficiency is very important. If the geothermal system loses some of its efficiency, it will cost home and building owners money in energy costs, which makes little sense since geothermal system installation costs are higher than most other heating systems.

Its key component is the ground loop system, polyethelene tubing which carries refrigerant from below the Earth’s surface and back to an above-ground compressor. When installed correctly, the buried ground loop can last for decades. A leak in the metal tubing is usually the only problem if the ground loop is not installed correctly. In the case of a leak, it may be necessary to dig up the tubing – often installed at least ten feet below the surface – and repair the leak.

Other geothermal system components include its air handling unit, compressor, and pump. These components require periodic system checks by qualified professional heating and cooling technicians. Maintenance normally requires filter changes and component lubrication, to name the most common. In some cases, building owners can perform their own filter replacement and refill of lubricants. However, it is recommended that an experienced technician perform a multiple-point inspection of the geothermal system components, usually during regularly scheduled annual or bi-annual service calls.

Tags: , , , , ,
Posted in Geothermal | Comments Off

A Question From Grand View: What Is Geothermal Heating?

Monday, September 26th, 2011

Having a geothermal heating system installed in your Grand View home means that you will actually be able to heat your home with heat extracted from the ground. If this sounds a bit preposterous to you, you are certainly not alone. But this type of home heating does actually work and the technology is not actually that much different from what is used in a standard heat pump system.

Regular heat pumps are able to remove heat from the outdoor air and transfer it into your house to maintain a comfortable temperature in the winter. You may think that there is no heat in the outdoor air in the winter, but that is not actually the case.

Air contains a substantial amount of heat even at very cold temperatures, and heat pumps are able to work quite well, particularly when the outdoor temperature is above freezing. Conveniently, the same process used to heat your house in the winter can be reversed in the summer to extract heat from the indoor air, providing you with a year round home comfort solution.

Geothermal heating works in much the same way, except that geothermal heat pumps extract heat from the ground rather than the air. In order to accomplish this, a loop of pipes is installed in the ground near your house and your geothermal heating system will pump a liquid, generally either antifreeze or water, through those pipes.

As it passes through the pipes, the liquid will absorb heat from the ground and carry it back to a heat exchanger within your house. At that point, the heat from the liquid will be released into air, which is then blown throughout your house.

And just as conventional heat pumps can cool your house in the summer by removing heat and pumping it outside, so too can geothermal heating systems. They do this simply by letting the liquid flowing through the pipes absorb the heat from inside air and then release it into the ground as it travels through the pipe loop below your house.

Because the ground is never as cold in the winter or as hot in the summer as the air, geothermal heat pumps are actually able to work effectively in more extreme conditions than many traditional heat pumps. However, because they require an entire system of pipes to be installed underground, they can be quite a bit more expensive initially as well.

Tags: , , , ,
Posted in Geothermal | Comments Off

How a Thermostat Works: A Tip From Notus

Wednesday, September 21st, 2011

Your thermostat is designed to closely monitor and maintain the temperature in your Notus home. When you flip the switch, you want your furnace or air conditioner to respond immediately. So, it’s a good idea to learn how it works so that if there is a problem, not only will you know better what needs to be fixed – you can decide whether to call a professional in for help.

Thermostats shouldn’t need input from you other than to set the initial temperature. From there, they are automatic switches. A thermometer inside the thermostat measures the indoor air temperature. When it gets above or below the limit you’ve specified, it triggers the thermostat to send a message to your home comfort system and keep things nice and comfortable.

Types of Thermostat

Thermostats come in two forms –electromechanical and electronic. An electromechanical thermostat is the simplest and has been used for decades to regulate temperature in homes. It has a simple strip or coil of metal that expands as the temperature rises and contract as it lowers. A mercury thermometer is placed on top of the strip. The coil’s movements cause the vial to tip as the temperature changes. There is a pair of electrical contacts on either end of the vial. The mercury can absorb that electrical current when the electrical contacts touch the thermometer. The mercury then acts as a switch to turn on your comfort system.

An electronic thermostat simply has an electronic sensor that measures the indoor air temperature. You set a temperature for your room and when it changes significantly, the switch inside your electronic thermostat is triggered, causing it to turn on your comfort system.

Ways to Upgrade Your Thermostat

Most homes only need the bare minimum in their thermostats. However, there is some very exciting technology on the market these days that can add quite a bit of value to your system. Not only can you install a programmable thermostat, you can opt for zone control systems that allow multiple thermostats in different rooms of your home.

Programming allows you to set temperatures for certain times of the day. This is especially great if you are gone from the house for long periods of time each day. Why heat or cool a home when it is empty? And if you have multiple people with different temperature needs, zone control temperature control allows you to set specific temperatures for specific rooms in your home – a very enticing option for large families or multi-story homes.

Tags: , , , , , ,
Posted in Energy Savings | Comments Off

What Is SEER? A Question From Sand Hollow

Wednesday, August 31st, 2011

If you’ve been looking at air conditioners in Sand Hollow, you’ve probably noticed that they all seem to have a SEER rating. But what does this actually mean?

The SEER, which stands for Seasonal Energy Efficiency Ratio, is a measure of how energy efficient a particular air conditioning model is. So when you’re shopping around for the best deal on an air conditioner for your home, this is something you’ll absolutely want to pay attention to.

Interpreting SEER Ratings

The SEER rating system is relatively simple – the higher the SEER, the more energy efficient the product. But because a higher price tag typically comes with a higher SEER rating, it’s important to know just how much more efficient a higher rated unit will be. It helps you decide whether paying significantly more for a higher rated unit is worth it in long term savings. Will it actually save you enough each month to make up for the difference in price?

Evaluating Your Energy Usage

A big factor here is how much you will use your air conditioner. If you live in a place with very hot and humid summers where the air conditioning runs constantly, you’re probably best off with the highest SEER you can find. When you consume that much energy to keep your home cool, you want to get as much as possible out of it, and that’s what a high SEER model can do for you.

On the other hand, if you live in an area that doesn’t have the harshest summers, you may be better off with a slightly less efficient (and therefore cheaper) model. Keep in mind, too, that the actual percentage increase in energy efficiency goes up by smaller and smaller increments the higher in SEER ratings you get. For instance, while a 10 SEER unit may be almost 20% more efficient than an 8 SEER model, a 12 SEER is only about 10% more efficient than that 10 SEER.

Finding the Right Balance

The best way to decide what SEER rating is best for you is to determine the annual cooling costs with your current unit and then calculate your savings in dollars based on the percentage each model would improve your efficiency. If you don’t currently have an air conditioner, this can be a bit tricky, but a professional contractor or air conditioning salesman can help you estimate your total monthly cooling costs with the various units.

Tags: , , , , ,
Posted in Air Conditioning | Comments Off