Signs Elmore County Residents Should Replace Their Heat Pump

March 28th, 2012

The decision to replace major equipment can be a difficult one. How do you know when to call it quits on a part of your heating and cooling system, especially one that is as important as a heat pump in Elmore County?

Here are some signs that you should replace your heat pump:

  • If your heat pumps is making significantly more noise than it used to, it can be sign of major mechanical distress. Many times, a heat pump replacement is the best solution.
  • Some components of a heat pump cost as much or more to repair as the whole unit does to replace. These components may include the compressor, the outdoor coil, the accumulator and the reversing valve. Once one of these goes, you are often better off replacing the heat pump than the broken component. Additionally, when repairs become so frequent as to no longer be cost effective, it’s a good time to replace the equipment.
  • A malfunctioning heat pump can cause problems with the humidity in your home. This is not a definitive indicator, but if you notice the humidity level rising in your home, you may need a heat pump replacement.
  • Any time your energy bill rises without a significant increase in usage, faulty or failing equipment is one of the top suspects. Your heat pump could very well be the culprit.
  • If you notice a cooling imbalance, such as rooms being too warm while others are too cool, your heat pump may be close to breaking.
  • Finally, if your heat pump is ten or more years old, replacing it is a good idea, even if it seems to be working fine. A new model will be much more efficient and chances are that the old one is headed for a major breakdown soon.

Keep in mind that these are not always definitive signs that your heat pump is done for good. Also, some of these may occur in combination. For example, you may have an old heat pump that is making a lot of noise and causing humidity problems.

Call Wickstrom Service Company for full diagnostics before making the decision to replace any major household equipment.

Tags: , ,
Posted in Heat Pump Replacement, Heat Pumps, Heating | Comments Off

What Causes Discolored Water in Boise?

March 22nd, 2012

Water discoloration in Boise can be troubling, because it makes it seem like your water is unclean, or you need plumbing maintenance. While sometimes discolored water can be cause for concern, other times it has pretty mundane origins.

Check out these common causes of discolored water:

  • Yellow/brown/reddish water is usually caused by rust, either in the water mains that run from the waiter supply or the pipes in your home. If the water is only discolored momentarily when you first turn the water on, it is probably rust in your pipes that gets flushed out quickly. If it persists longer, it may be rust that was stirred up in the water mains. Turn a few of your cold taps on for several minutes, or just turn the tap off and wait about thirty minutes.
  • Water that appears white or cloudy often does so because of trapped air bubbles. Air that is under pressure in your pipes gets released when you turn the tap on, which causes tiny bubbles, just like in a bottle of soda. This has no effect on your water’s quality. The discoloration should dissipate after standing for a few minutes.
  • Sometimes water appears to have a greenish hue, especially when standing under fluorescent light. This is sometimes due to tiny copper traces from the piping in your home, or — depending on the climate — seasonal algae blooms in the local water supply. Either way, this green color is usually harmless.
  • Blue water can occur for a few reasons. One is severe copper corrosion in the plumbing system, which leeches into the pipes. A second cause can be toilet cleaner. If you use a cleaning product in your toilet tank, sometimes that can cause your tap water to turn blue. If you suspect this is the case, do not drink that water and immediately call a local professional. The chemicals in such cleaners can be toxic and hazardous to your health, and could be cause for repiping service.

Keep in mind that those are some of the most common causes of discolored water. There can be others, and if you are unsure, you should have the situation checked out by a pro.

 

Tags: , ,
Posted in Plumbing, Plumbing Maintenance | Comments Off

Reasons A Furnace is Producing No Heat Nampa

March 16th, 2012

The last occasion on which you want to worry about furnace maintenance in Nampa is in the dead of winter, when the outside is chilly you just want to seek refuge in your own toasty home…only to discover that it’s not much warmer than the outdoors.

This may seem like a total emergency, and the combination of chill and frustration may cause panic to set in. Don’t start fretting too much just yet, though. There are some potentially simple causes and solutions for this problem, such as:

  • The thermostat may be set too low or on the wrong setting. Yes, it seems obvious, but sometimes the solution is staring you right in the face. Check that your thermostat is set high enough to call for heat and that it is on HEAT mode.
  • A circuit breaker may be tripped or a fuse may be blown. It could be the one dedicated to the thermostat, glow coil igniter or furnace itself. Check the breaker or fuse box in your home and either flip the breaker or replace the fuse. If it continues to trip or blow, get it looked at professionally—there may be a bigger problem going on.
  • The thermostat may not be working, so it is either improperly detecting the temperature or improperly reporting it to the furnace, so the heat does not kick on. Either way, it probably needs to be replaced.
  • The furnace is not igniting properly. This could mean the pilot light is out on furnaces without electric ignition, the gas valve is closed and can’t ignite or some other ignition malfunction. Check the pilot and gas valves to make sure they are on and working.

If you have checked all these things and the thermostat still is not working, or if you don’t feel comfortable looking into these causes on your own, you are best served by calling a professional repairman to diagnose and fix the furnace.

Often, these big failures are just the symptom of a smaller problem, so in all likelihood you won’t have to replace the furnace or do any major repairs, especially if it has been well-maintained throughout its life.  If you have any questions please call Wickstrom Service Company.

Tags: , ,
Posted in Furnace, Furnace Maintenance, Thermostat | Comments Off

Why Is There a Sewer Smell in Our Garden City Home?

March 7th, 2012

Detecting a sewer smell in your Garden City home is never pleasant on a number of levels. Of course, the main thing you are most likely concerned about is that the smell makes it hard to be in your house. After all, who wants to live in a place that smells like a sewer?

But there are other reasons to be concerned when you smell something like this as well. For one thing, since this is not the way that your house should smell, it likely means that there is a problem with your venting system or you need some drain & sewer maintenance. Also, gasses that generate that sewer smell can be made up of methane and hydrogen sulfide, both of which are quite dangerous and not the types of gasses you want your family to be breathing on a regular basis.

In most cases, you will need to call in a professional to determine the exact cause of the sewer smell and eliminate it. This can sometimes be expensive if the problem is widespread or difficult to locate, but it does not have to be. Some causes of a sewer smell in your house are relatively easy to remedy, particularly for an experienced professional.

For instance, the smell may be the result of leaks in certain pipes and can be eliminated when those leaks are repaired. Or a low water level in your toilet could be the culprit. The constant presence of water in your toilet bowl is actually what keeps those sewer gasses from seeping up and into your house. So if the water level in the toilet bowl drops for some reason, the gasses can be allowed to escape into your house. This is especially likely if you have a toilet that does not get used often and where the water may have evaporated over time.

Another common reason that a sewer smell can develop in your house is that the vent pipe has become clogged. Since it is the job of this pipe to vent sewer gasses out of your home, it is not surprising that a blockage in this system could cause the odors to build up inside. Depending on your skill level, you may be able to tackle the project of unclogging the vent pipe on your own or you may need to call Wickstrom Service Company to get the job done.

Tags: , ,
Posted in Bathroom Plumbing, Plumbing, plumbing maintenance | Comments Off

How to Install a Toilet in Boise

February 28th, 2012

A toilet is a relatively basic piece of plumbing equipment in Boise, but that does not mean that installing it is easy. This is certainly a plumbing maintenance that many people can do on their own, but you should be prepared to devoting the majority of your day to the project. While the installation itself is not terribly complicated, it is quite important that you get it right, so make sure you have all of the necessary materials, equipment and tools before you begin.

The first thing to remember is that you need to install your toilet in an appropriate place relative to the rest of your bathroom plumbing. Especially if you are installing your toilet along a branch drain, make sure that the sink, shower and any other plumbing fixtures are upstream of the spot where you will be installing the toilet.

You will also need to make sure that you install the toilet an appropriate distance from the wall. You need to be able to get around the toilet, and you also want to leave space so that work can be performed on the unit later. Putting your toilet too close to the wall can cause all kinds of complications in the way the unit functions and there is also a possibility of condensation build-up. For all of these reasons, it is important to make sure you are allowing an adequate amount of space on all sides.

The procedure you will have to follow when installing a toilet will be slightly different depending on whether you are installing it in a new spot or simply replacing an existing unit. When replacing an old toilet, you need to remove everything involved in the previous installation. That means taking the old bolts out of the floor and scraping away any residue to ensure that you have a clean and even surface to begin your installation on.

You should also make sure that you are aware of all applicable local codes before you begin your work. Even if you technically install your toilet correctly, you could run into trouble later on if your installation is not actually up to code. It is also important to remember to level all of your fixtures before you complete the installation process and to make sure you use a dielectric or brass fitting when attaching galvanized steel and copper to each other.  If you want to follow up with a professional plumbing call Wickstrom Service Company.

Tags: , ,
Posted in Bathroom Plumbing, Plumbing, plumbing maintenance | Comments Off

Alternatives to Air Conditioning in Your Elmore County Home

February 22nd, 2012

Let’s face it – we rely pretty heavily on air conditioning in Elmore County to keep us comfortable during the warmest months of the summer. So, what do you do when the mercury dings 90+ and an air conditioner installation might not be the best option or you are in a place without AC? Luckily, there are alternatives. Here are some of the better options:

  • Move Air through the House – As simple as it sounds, air circulation can have a huge impact on the temperature inside, especially in the late afternoon. Mid-afternoon sun will hit your roof no matter how many trees you have planted. The result is a decent amount of heat pouring into your home. But, if you open the windows and let a cross breeze through, amplifying it with fans, especially ceiling fans, moving air will carry that heat out of the house later in the day when the temperature drops.
  • Block Direct Sunlight – Unless it’s 90+ degrees outside, most of the discomfort in heat comes from direct sunlight. Block that direct sunlight and you severely reduce how warm it might get in your home. Trees planted along western, eastern and southern walls do this very effectively, especially if they are deciduous and will allow in the warming sun in the winter.
  • The Power of Water – Feel warm? Get some cool water and place it on your forehead, arms or legs. A bowl of cool water in front of a fan can be soothing as well, assuming humidity isn’t a problem. If it is, consider getting a dehumidifier to run in lieu of an air conditioner for those days that aren’t too hot. They are less expensive and can reduce discomfort significantly.
  • Evaporative Coolers – Evaporative coolers are extremely popular in Europe and Japan where energy costs are relatively high. They use up to 80% less electricity than air conditioners, don’t require refrigerants linked to global warming, and they work extremely well in dry heat. There are evaporative coolers available that can cool your entire home, though the most common devices are those designed for a single room. They are sometimes called “swamp coolers” as well.

I’m sure we’d all rather have a comfortably air conditioned room to lounge in during the hottest months of summer, but in lieu of electric powered comfort, keep in mind the simple, effective ways people have been staying cool for centuries.  If you have any questions about this please contact Wickstrom Service Company.

Tags: , ,
Posted in Air Conditioning, Air Conditioning Installation, Energy Savings | Comments Off

What Does an Air Handler Do for Boise Residents?

February 17th, 2012

Your HVAC system is a complex system filled with vital components tasked with keeping you comfortable. One of the most important of those component is the air handler – the device responsible for circulating the heated or cooled air produced by your system through the vents in your home and into each of your rooms.

The air handler is a metal box, usually consisting of a blower and the heating or cooling elements. It might also include dampers and sound attenuators along with an air filtration and humidity control system. The simplest air handlers are designed only to transfer the heated or cooled air from a heat pump to the various parts of your home, while the most advanced devices are designed to perfectly condition and clean that air as it is circulated.

Types of Air Handler

There are a few different types of air handler as well, depending on the size of the HVAC system and the nature of the heating and/or cooling used. Most homes, for example, use terminal units which consist of just an air filter, blower and coil. This very simple system is all you really need to heat and transmit air through your ductwork.

However, for larger systems, there are also makeup air units which use outdoor air instead of recirculated indoor air. There are also packaged and rooftop units which are designed to be placed outside. These devices are most commonly used for commercial applications when space is limited.

How the Air Handler Works

An air handler’s most basic component is a blower fan. This device is run by an AC electric motor and can be either single speed or variable speed depending on the size and scope of your air handler. The dampers on the fan will control the flow rate of the air going through the blower fan. Most residential blowers are part of the air conditioning or furnace system, while commercial systems often have multiple blowers to maintain steady airflow for a larger space.

Because an air handler passes all of the air that will go through your vents, it is the best place to install high quality MERV or HEPA filters to remove pathogens and contaminants. It is also a good place to install humidity control devices to either raise or lower humidity depending on the time of the year.

Your air handler is an incredibly important component in your home heating and cooling system. Without it, all that heated and cooled air you pay for each year wouldn’t reach you. So, make sure to keep your system in tip top condition.  Contact Wickstrom Service Company with any questions.

Tags: , ,
Posted in Heat Pump Systems, Heat Pumps, Heating | Comments Off

Happy Valentine’s Day From Your Treasure Valley HVAC and Plumbing Contractors!

February 14th, 2012

Everyone at Wickstrom Plumbing wishes you a very Happy Valentine’s Day! We hope your day is full of love and laughter! Valentine’s Day is a time to really appreciate all of the wonderful people in your life, including your significant other, your family, and your friends. Take a moment today to let each of them know how special they are to you. Even something simple, like a handmade card, can really make someone’s whole day!

While your HVAC system might not seem like the most romantic place to start your gift giving, a few simple upgrades can make your house more comfortable, which is something your whole family will appreciate! A HEPA filter can keep dust and allergens out of your air, and a new furnace or heat pump can keep your house at more consistent temperatures and cut down on your energy use. An upgrade to your HVAC system is truly a gift that keeps on giving!

For more information about easy ways to improve your home, give Wickstrom Plumbing a call! And to help make your Valentine’s Day as happy as it can be, here is a recipe for Ghirardelli Chocolate Raspberry Cheesecake Hearts

Ingredients

  • Crust:
  • 1 1/2 cups chocolate graham cracker crumbs
  • 1/2 cup ground almonds
  • 4 tablespoons white sugar
  • 3/4 cup butter, melted
  • Cheesecake:
  • 4 (8 ounce) packages cream cheese, softened
  • 3/4 cup white sugar
  • 4 eggs
  • Raspberry puree (recipe below)
  • 2 cups Ghirardelli 60% Cacao Bittersweet Chocolate Chips
  • 1/2 cup heavy cream
  • Raspberry puree:
  • 1 (10 ounce) package frozen raspberries
  • 4 tablespoons white sugar
  • Chocolate Ganache (optional):
  • 8 ounces Ghirardelli 60% Cacao Bittersweet Chocolate Chips
  • 1/2 cup heavy cream
  • Additional Garnishes (optional):
  • Fresh raspberries
  • 8 ounces white chocolate, melted for drizzling

Directions

  1. Preheat over to 325 degrees F (165 degrees C).
  2. CRUST: In a microwave safe bowl, melt the butter. Add the chocolate graham crackers, ground almonds, and sugar and mix until combined. Press mixture into the bottom of a 9-inch springform pan and set aside.
  3. PUREE: In a saucepan, combine raspberries and sugar. Bring to boil, and continue boiling 3-5 minutes, or until sauce is thick. Strain sauce through a mesh strainer to remove seeds and set aside.
  4. CHEESECAKE: In a small pot over low heat, bring the whipping cream to just boiling. Remove from heat and add the chocolate chips. Set aside for 5 minutes and then stir until smooth.
  5. In a large bowl, mix together cream cheese and 3/4 cup sugar until smooth. Beat in eggs, one at a time. Remove approximately 1 1/2 cup of this batter and place into a smaller bowl and add 1/2 cup raspberry puree. Blend until combined. Add the melted chocolate to the remaining batter and mix until combined. Pour the chocolate cheesecake batter into the pan. Very carefully layer the raspberry cheesecake mixture on top of the chocolate mixture. Bake for 60 to 75 minutes, or until filling is set. Cool in pan, then cover with plastic wrap and refrigerate until cold before removing from pan.

For more details, visit allrecipes.com.

Tags: , ,
Posted in Heat Pump Systems, Heating, Indoor Air Quality | Comments Off

Heating Tips from Homedale: When Is it Time for a Backup Heating System?

February 13th, 2012

A backup heating system is sometimes necessary for Homedale homeowners who heat their homes with an air-source heat pump. This style of heat pump transfers the heat from the outside air to your home in the winter, and it pushes the warm air outside the home in the summer. Although some systems are efficient enough to work in colder climates, most heat pump systems require a backup heater when temperatures drop below 20° F.

Furnaces are commonly used as a backup heater for air-source heat pumps, especially since the furnace fan blower can help distribute the hot air throughout the home. Although they are more expensive to buy and install, geothermal heat pumps typically do not require a backup heating system. These are also called ground-source or water-source heat pumps since they draw in heat from the ground below the house or from a nearby water source. Because they take advantage of the ground or water temperatures, they are also easier to maintain and have lower operating costs.

Getting the most cost-efficiency from a geothermal heat pump will depend on several factors, such as the size of your property, the temps of the subsoil, and access to local water sources. You will most likely not have to install a backup heating system with a ground-source or water-source heat pump; however, it is important to think about the installation costs and the variables that need to be in place before deciding on this type of heat pump.

Absorption heat pumps use a heat source, such as natural gas or solar-heated water, instead of electricity. Natural gas is typically used for absorption heat pumps, so they are also called gas-fired heat pumps. Depending on the source of the heat, you may or may not need a backup heating system. It’s always best to speak to a professional heating and cooling contractor if you are not sure when it’s necessary for a backup heating system.

Call Wickstrom Plumbing & Heating if you have any questions about a backup heater for your Homedale home.

Tags: , ,
Posted in Furnace, Heat Pumps, Heating | Comments Off

How Can I Stop My Toilet from Running in Highlands?

February 10th, 2012

Nothing is more obnoxious in Highlands than the constant tinkling sound of a running toilet. When your toilet starts pouring water through at a record rate, it is time for a little bathroom plumbing to make sure everything is working properly. Luckily, most of the time, a running toilet is easy plumbing. It may only be that the tank flap or the diaphragm needs adjustment. Here are some quick tips to help you diagnose and repair that running toilet and get back the peace and quiet of your bathroom once and for all.

  1. Going In – Open the tank of your toilet take a close look at the various parts. First, check the ball cock – the valve linked to the large plastic ball that floats on top of the water in your tank. If the noise is coming directly from the valve or you can see obvious issues, the ball cock likely needs to be replaced. Sometimes, it needs only basic cleaning, which you should do first before running out to buy a new part. It also possible that the tank flap is having issues. Look for a small cone in the hole at the base of the tank. Press down on it to see if the sound stops. If it does, the tank flap likely needs replacement.
  2. Turn off the Water Supply – Before doing any more, turn off your toilet’s water supply. Do not worry – you should not need to go hunting for the valve. It is most often located next to the toilet on the floor of your bathroom.
  3. Replacing Your Parts – When replacing any parts for a toilet, always remove the old part first and bring it with you to the hardware store. Almost all toilets have slightly different parts that may not match up universally. By having the part you need, you can give it to an expert in toilet repair and they can quickly find the right replacement.
  4. Careful Replacement – Most of the time, replacement simply involves unscrewing or removing the part and placing a new one in place. However, if you own a low flush toilet or a specialty design that does not have the same parts or layout of a traditional tank-based toilet, you may need the help of a professional to avoid any unwanted accidents or issues in the replacement process.

Ideally, the entire process should only take the better part of a couple hours, including the time it takes to go to the hardware store and purchase your replacement part.  If you have any questions about this process please call Wickstrom Plumbing.

Tags: , ,
Posted in Bathroom Plumbing, Plumbing, plumbing maintenance | Comments Off

« Older Entries
Newer Entries »