Archive for February, 2012

How to Install a Toilet in Boise

Tuesday, February 28th, 2012

A toilet is a relatively basic piece of plumbing equipment in Boise, but that does not mean that installing it is easy. This is certainly a plumbing maintenance that many people can do on their own, but you should be prepared to devoting the majority of your day to the project. While the installation itself is not terribly complicated, it is quite important that you get it right, so make sure you have all of the necessary materials, equipment and tools before you begin.

The first thing to remember is that you need to install your toilet in an appropriate place relative to the rest of your bathroom plumbing. Especially if you are installing your toilet along a branch drain, make sure that the sink, shower and any other plumbing fixtures are upstream of the spot where you will be installing the toilet.

You will also need to make sure that you install the toilet an appropriate distance from the wall. You need to be able to get around the toilet, and you also want to leave space so that work can be performed on the unit later. Putting your toilet too close to the wall can cause all kinds of complications in the way the unit functions and there is also a possibility of condensation build-up. For all of these reasons, it is important to make sure you are allowing an adequate amount of space on all sides.

The procedure you will have to follow when installing a toilet will be slightly different depending on whether you are installing it in a new spot or simply replacing an existing unit. When replacing an old toilet, you need to remove everything involved in the previous installation. That means taking the old bolts out of the floor and scraping away any residue to ensure that you have a clean and even surface to begin your installation on.

You should also make sure that you are aware of all applicable local codes before you begin your work. Even if you technically install your toilet correctly, you could run into trouble later on if your installation is not actually up to code. It is also important to remember to level all of your fixtures before you complete the installation process and to make sure you use a dielectric or brass fitting when attaching galvanized steel and copper to each other.  If you want to follow up with a professional plumbing call Wickstrom Service Company.

Tags: , ,
Posted in Bathroom Plumbing, Plumbing, plumbing maintenance | Comments Off

Alternatives to Air Conditioning in Your Elmore County Home

Wednesday, February 22nd, 2012

Let’s face it – we rely pretty heavily on air conditioning in Elmore County to keep us comfortable during the warmest months of the summer. So, what do you do when the mercury dings 90+ and an air conditioner installation might not be the best option or you are in a place without AC? Luckily, there are alternatives. Here are some of the better options:

  • Move Air through the House – As simple as it sounds, air circulation can have a huge impact on the temperature inside, especially in the late afternoon. Mid-afternoon sun will hit your roof no matter how many trees you have planted. The result is a decent amount of heat pouring into your home. But, if you open the windows and let a cross breeze through, amplifying it with fans, especially ceiling fans, moving air will carry that heat out of the house later in the day when the temperature drops.
  • Block Direct Sunlight – Unless it’s 90+ degrees outside, most of the discomfort in heat comes from direct sunlight. Block that direct sunlight and you severely reduce how warm it might get in your home. Trees planted along western, eastern and southern walls do this very effectively, especially if they are deciduous and will allow in the warming sun in the winter.
  • The Power of Water – Feel warm? Get some cool water and place it on your forehead, arms or legs. A bowl of cool water in front of a fan can be soothing as well, assuming humidity isn’t a problem. If it is, consider getting a dehumidifier to run in lieu of an air conditioner for those days that aren’t too hot. They are less expensive and can reduce discomfort significantly.
  • Evaporative Coolers – Evaporative coolers are extremely popular in Europe and Japan where energy costs are relatively high. They use up to 80% less electricity than air conditioners, don’t require refrigerants linked to global warming, and they work extremely well in dry heat. There are evaporative coolers available that can cool your entire home, though the most common devices are those designed for a single room. They are sometimes called “swamp coolers” as well.

I’m sure we’d all rather have a comfortably air conditioned room to lounge in during the hottest months of summer, but in lieu of electric powered comfort, keep in mind the simple, effective ways people have been staying cool for centuries.  If you have any questions about this please contact Wickstrom Service Company.

Tags: , ,
Posted in Air Conditioning, Air Conditioning Installation, Energy Savings | Comments Off

What Does an Air Handler Do for Boise Residents?

Friday, February 17th, 2012

Your HVAC system is a complex system filled with vital components tasked with keeping you comfortable. One of the most important of those component is the air handler – the device responsible for circulating the heated or cooled air produced by your system through the vents in your home and into each of your rooms.

The air handler is a metal box, usually consisting of a blower and the heating or cooling elements. It might also include dampers and sound attenuators along with an air filtration and humidity control system. The simplest air handlers are designed only to transfer the heated or cooled air from a heat pump to the various parts of your home, while the most advanced devices are designed to perfectly condition and clean that air as it is circulated.

Types of Air Handler

There are a few different types of air handler as well, depending on the size of the HVAC system and the nature of the heating and/or cooling used. Most homes, for example, use terminal units which consist of just an air filter, blower and coil. This very simple system is all you really need to heat and transmit air through your ductwork.

However, for larger systems, there are also makeup air units which use outdoor air instead of recirculated indoor air. There are also packaged and rooftop units which are designed to be placed outside. These devices are most commonly used for commercial applications when space is limited.

How the Air Handler Works

An air handler’s most basic component is a blower fan. This device is run by an AC electric motor and can be either single speed or variable speed depending on the size and scope of your air handler. The dampers on the fan will control the flow rate of the air going through the blower fan. Most residential blowers are part of the air conditioning or furnace system, while commercial systems often have multiple blowers to maintain steady airflow for a larger space.

Because an air handler passes all of the air that will go through your vents, it is the best place to install high quality MERV or HEPA filters to remove pathogens and contaminants. It is also a good place to install humidity control devices to either raise or lower humidity depending on the time of the year.

Your air handler is an incredibly important component in your home heating and cooling system. Without it, all that heated and cooled air you pay for each year wouldn’t reach you. So, make sure to keep your system in tip top condition.  Contact Wickstrom Service Company with any questions.

Tags: , ,
Posted in Heat Pump Systems, Heat Pumps, Heating | Comments Off

Happy Valentine’s Day From Your Treasure Valley HVAC and Plumbing Contractors!

Tuesday, February 14th, 2012

Everyone at Wickstrom Plumbing wishes you a very Happy Valentine’s Day! We hope your day is full of love and laughter! Valentine’s Day is a time to really appreciate all of the wonderful people in your life, including your significant other, your family, and your friends. Take a moment today to let each of them know how special they are to you. Even something simple, like a handmade card, can really make someone’s whole day!

While your HVAC system might not seem like the most romantic place to start your gift giving, a few simple upgrades can make your house more comfortable, which is something your whole family will appreciate! A HEPA filter can keep dust and allergens out of your air, and a new furnace or heat pump can keep your house at more consistent temperatures and cut down on your energy use. An upgrade to your HVAC system is truly a gift that keeps on giving!

For more information about easy ways to improve your home, give Wickstrom Plumbing a call! And to help make your Valentine’s Day as happy as it can be, here is a recipe for Ghirardelli Chocolate Raspberry Cheesecake Hearts

Ingredients

  • Crust:
  • 1 1/2 cups chocolate graham cracker crumbs
  • 1/2 cup ground almonds
  • 4 tablespoons white sugar
  • 3/4 cup butter, melted
  • Cheesecake:
  • 4 (8 ounce) packages cream cheese, softened
  • 3/4 cup white sugar
  • 4 eggs
  • Raspberry puree (recipe below)
  • 2 cups Ghirardelli 60% Cacao Bittersweet Chocolate Chips
  • 1/2 cup heavy cream
  • Raspberry puree:
  • 1 (10 ounce) package frozen raspberries
  • 4 tablespoons white sugar
  • Chocolate Ganache (optional):
  • 8 ounces Ghirardelli 60% Cacao Bittersweet Chocolate Chips
  • 1/2 cup heavy cream
  • Additional Garnishes (optional):
  • Fresh raspberries
  • 8 ounces white chocolate, melted for drizzling

Directions

  1. Preheat over to 325 degrees F (165 degrees C).
  2. CRUST: In a microwave safe bowl, melt the butter. Add the chocolate graham crackers, ground almonds, and sugar and mix until combined. Press mixture into the bottom of a 9-inch springform pan and set aside.
  3. PUREE: In a saucepan, combine raspberries and sugar. Bring to boil, and continue boiling 3-5 minutes, or until sauce is thick. Strain sauce through a mesh strainer to remove seeds and set aside.
  4. CHEESECAKE: In a small pot over low heat, bring the whipping cream to just boiling. Remove from heat and add the chocolate chips. Set aside for 5 minutes and then stir until smooth.
  5. In a large bowl, mix together cream cheese and 3/4 cup sugar until smooth. Beat in eggs, one at a time. Remove approximately 1 1/2 cup of this batter and place into a smaller bowl and add 1/2 cup raspberry puree. Blend until combined. Add the melted chocolate to the remaining batter and mix until combined. Pour the chocolate cheesecake batter into the pan. Very carefully layer the raspberry cheesecake mixture on top of the chocolate mixture. Bake for 60 to 75 minutes, or until filling is set. Cool in pan, then cover with plastic wrap and refrigerate until cold before removing from pan.

For more details, visit allrecipes.com.

Tags: , ,
Posted in Heat Pump Systems, Heating, Indoor Air Quality | Comments Off

Heating Tips from Homedale: When Is it Time for a Backup Heating System?

Monday, February 13th, 2012

A backup heating system is sometimes necessary for Homedale homeowners who heat their homes with an air-source heat pump. This style of heat pump transfers the heat from the outside air to your home in the winter, and it pushes the warm air outside the home in the summer. Although some systems are efficient enough to work in colder climates, most heat pump systems require a backup heater when temperatures drop below 20° F.

Furnaces are commonly used as a backup heater for air-source heat pumps, especially since the furnace fan blower can help distribute the hot air throughout the home. Although they are more expensive to buy and install, geothermal heat pumps typically do not require a backup heating system. These are also called ground-source or water-source heat pumps since they draw in heat from the ground below the house or from a nearby water source. Because they take advantage of the ground or water temperatures, they are also easier to maintain and have lower operating costs.

Getting the most cost-efficiency from a geothermal heat pump will depend on several factors, such as the size of your property, the temps of the subsoil, and access to local water sources. You will most likely not have to install a backup heating system with a ground-source or water-source heat pump; however, it is important to think about the installation costs and the variables that need to be in place before deciding on this type of heat pump.

Absorption heat pumps use a heat source, such as natural gas or solar-heated water, instead of electricity. Natural gas is typically used for absorption heat pumps, so they are also called gas-fired heat pumps. Depending on the source of the heat, you may or may not need a backup heating system. It’s always best to speak to a professional heating and cooling contractor if you are not sure when it’s necessary for a backup heating system.

Call Wickstrom Plumbing & Heating if you have any questions about a backup heater for your Homedale home.

Tags: , ,
Posted in Furnace, Heat Pumps, Heating | Comments Off

How Can I Stop My Toilet from Running in Highlands?

Friday, February 10th, 2012

Nothing is more obnoxious in Highlands than the constant tinkling sound of a running toilet. When your toilet starts pouring water through at a record rate, it is time for a little bathroom plumbing to make sure everything is working properly. Luckily, most of the time, a running toilet is easy plumbing. It may only be that the tank flap or the diaphragm needs adjustment. Here are some quick tips to help you diagnose and repair that running toilet and get back the peace and quiet of your bathroom once and for all.

  1. Going In – Open the tank of your toilet take a close look at the various parts. First, check the ball cock – the valve linked to the large plastic ball that floats on top of the water in your tank. If the noise is coming directly from the valve or you can see obvious issues, the ball cock likely needs to be replaced. Sometimes, it needs only basic cleaning, which you should do first before running out to buy a new part. It also possible that the tank flap is having issues. Look for a small cone in the hole at the base of the tank. Press down on it to see if the sound stops. If it does, the tank flap likely needs replacement.
  2. Turn off the Water Supply – Before doing any more, turn off your toilet’s water supply. Do not worry – you should not need to go hunting for the valve. It is most often located next to the toilet on the floor of your bathroom.
  3. Replacing Your Parts – When replacing any parts for a toilet, always remove the old part first and bring it with you to the hardware store. Almost all toilets have slightly different parts that may not match up universally. By having the part you need, you can give it to an expert in toilet repair and they can quickly find the right replacement.
  4. Careful Replacement – Most of the time, replacement simply involves unscrewing or removing the part and placing a new one in place. However, if you own a low flush toilet or a specialty design that does not have the same parts or layout of a traditional tank-based toilet, you may need the help of a professional to avoid any unwanted accidents or issues in the replacement process.

Ideally, the entire process should only take the better part of a couple hours, including the time it takes to go to the hardware store and purchase your replacement part.  If you have any questions about this process please call Wickstrom Plumbing.

Tags: , ,
Posted in Bathroom Plumbing, Plumbing, plumbing maintenance | Comments Off

Make Your Heating System More Energy Efficient in Boise Bench

Wednesday, February 8th, 2012

Efficiency is what you want in Boise Bench when it comes to heating your home. You want a furnace that provides the greatest degree of accurate indoor comfort while at the same time operating at peak efficiency to reduce energy usage and lower utility bills. That’s seems like a lot to ask of a simple mechanical system but you should expect it out of the furnace in your basement, attic, or mechanical room.

It is especially important today as energy costs have steadily increased, including electricity, natural and propane gas, and oil. The best way to combat rising prices if you have a gas powered furnace is to use less energy. It is a simple statement but one that bears repeating: higher efficiency equals lower operating costs.

Here are some ways to make your heating system more energy efficient:

  1. Clean or replace furnace filters on a regular basis. A dirty or clogged filter will make your furnace work harder and become much less energy efficient. Monthly or quarterly cleaning or replacements are easy to do and will result greater operating efficiencies.
  2. Inspect your home’s ventilation system for accumulation of dirt, dust, or debris. Have you recently added new carpeting? Do your pets shed? Is there a large number of people living in your home? If you answered yes to any of these questions you may need to inspect your ventilation system. You may need to remove the ventilation grilles to take a closer look. Wiping down the inside of your duct work or vacuuming the duct work with a hose attachment will often do the trick. You can also schedule a duct cleaning with a local professional duct cleaning contractor.
  3. Remove obstructions from around vents and grilles. You need a clean path for air to flow into and out of rooms. Restricted airflow makes your furnace work harder and become less energy efficient.
  4. Consider an upgrade to a two-speed or variable speed furnace. Most older furnaces operated on one speed, which cycled on and off and consumed a lot of energy. Today’s furnaces operate at lower speeds, consuming less energy and often remaining on to keep a steady airflow and prevent constant on and off cycling. These newer furnaces are much more energy efficient and cost less to operate.
  5. Adhere to a regular schedule of planned furnace maintenance. If you don’t clean and inspect your furnace on a regular basis, schedule service calls with a local qualified heating contractor. Your contractor will likely have a service agreement plan to fit your budget, which allows for annual inspections, priority emergency service calls, and discounts on parts and services.

Besides saving on energy costs, your efficient furnace will leave a smaller “carbon footprint.” Your efficient furnace will exhaust less carbon dioxide into the atmosphere and maintain a more “green” profile. And being ecologically friendly can be just as important as saving money.

You can be assured that an energy efficient heating system will keep more money in your pocket this fall and winter. You can take that to the bank.  If you have any questions about saving money with your furnace please call Wickstrom Plumbing & HVAC.

Tags: , ,
Posted in Energy Savings, Furnace, Gas Furnace | Comments Off

Boise Plumbing Tips: How to Clean a Porcelain Enamel Bathtub

Monday, February 6th, 2012

No one in Boise wants a dirty, grimy tub. After all, that’s the apparatus you use to get clean. But because of the nature of its use, the tub can be tricky to keep clean. Need some plumbing tips to keep that porcelain enamel tub looking shiny and clean? Try some of these techniques for a ring-free, pristine bathtub.

Commercial Solutions

Of course, there are a number of commercial cleaning products out there that can be used on porcelain enamel, including in your tub. Here is a look at some of those products and how to use them for better success:

  • Mix a solution of dish soap and hot water. Use a rag or sponge to wipe the tub with the soapy water, then rinse clean. This works well for routine cleaning.
  • Instead of the hot soapy water solution, you can use a commercial spray product designed for the bathroom.
  • Sprinkle scouring powder (e.g., Comet or Ajax) liberally around the tub. Use a damp scouring pad to scrub dirt and grime free from the surface. This is a better solution for deeper cleaning, once a month or so.
  • For tougher stains that a scouring pad doesn’t get out, try a pumice stone and some stiffer scrubbing.

The Natural Route

If you don’t have the necessary cleaning products around, or just prefer to do things more naturally, there are some techniques involving products you probably already have around the house that can also get your tub sparkling. See if any of these methods work for you:

  • Make your own scouring powder with equal parts baking soda and salt. Use this once a week with a warm rag.
  • For rust stains, sprinkle them with salt and add lemon juice. Scrub the lemon/salt mixture with a sponge or rag to dislodge the rust.
  • Sprinkle baking soda around the tub and spray with vinegar. The resulting fizzy reaction helps break up deposits of dirt and grime. Scrub with a scouring pad for bonus cleaning action.

There are lots of plumbing maintenance techniques for keeping tubs clean, and for every method, you can find people who swear by it. Find one that you like and that works for you, or contact Wickstrom Plumbing if you have any questions.

Tags: , ,
Posted in Bathroom Plumbing, Plumbing, plumbing maintenance | Comments Off

Common Kitchen Plumbing Advice from Top Caldwell Plumbers

Friday, February 3rd, 2012

The kitchen sink is an essential part of everyone’s daily chores in Caldwell.  There are countless grimy tasks that our sink has to combat with, it is quite amazing that we do not all encounter headaches with our plumbing maintenance weekly. Please credit the marvels of modern engineering and design for the your sink’s fortitude.

Unfortunately that does not mean that kitchen plumbing is flawless though, all homeowners face tribulations with their kitchen plumbing from time to time. Fortunately, many plumbing issues are reasonably common and customary and therefore are easily fixed.

Here are 3 common kitchen plumbing problems and some possible solutions for each:

1.     Congested drain
Perhaps the most frequently frustrating of all kitchen sink problems is the congested drain. If you have never had to deal with one, first thank your lucky stars and then brace for impact, because you’ll probably have to soon. This is usually caused by some piece of food or other deposit obstructing the sink. Try plunging it out, or breaking it up by pouring boiling water or white vinegar down the drain. This may take several attempts. If none of that works, you can resort to a commercial drain opening product.

2.     Dripping faucet 

Is there a dripping sound keeping you awake at night? Often, leaky faucets are caused by an obstructed aerator, which is that little screen thing on the end of your faucet. Unscrew that, clean it with water and put it back on. If the faucet still leaks, there may be a loose fitting somewhere further down the line, in which case you may need to call in a plumber. (Bonus tip: To quiet the dripping noise until the leak is fixed, tie a length of string to the end of the faucet. The water will run down the string silently instead of clanging into the basin all night.)

3.     Garbage disposal won’t spin
The quickest and most common solution to this problem is the reset the garbage disposal by pressing the button on the unit under the sink.

If these tips do not quickly solve your kitchen plumbing challenges, then it is probably best to summon a professional. Plumbing is a complex thing – and garbage disposals can be treacherous – so on occasion it is best to leave it to the experts at Wickstrom Plumbing.

Tags: , ,
Posted in Kitchen Plumbing, Plumbing, water line | Comments Off

Clogged Kitchen Sink in Garden City? This is What You Should Do

Wednesday, February 1st, 2012

Clogs are common in almost every household and place of business in Garden City. Even if you take special care with your kitchen plumbing and try not to put anything that might cause a clog down the drain, there is a good chance that excess bits of food, grease, hair, or other unsavoury materials and pieces will eventually line and clog your pipes. So, what should you do when a clog takes over your kitchen sink? Here are a few simple steps for quick removal.

  1. Disconnect Your Garbage Disposal – Before you do anything, you will need to disconnect the disposal from the sink so you have access to the drain. Start by unplugging your disposal – never work on your sink or the garbage disposal with it plugged in. If the disposal itself is clogged, turn the blades manually to work free any clogs. If it turns freely, the clog might be past the disposal in the pipes and it will need to be removed for further cleaning. Most of the time, however, the clog will be either in the disposal or in the opposite sink.
  2. Plunging Your Sink – Once you have ruled out the disposal, it is time to plunge the sink. Make sure to clamp off the water line from your dishwasher so that you do not push any water back into the machine. If you have two sink drains, make sure to seal up the one you are not plunging so that a good seal is created. Do NOT plunge the sink if you have poured any chemicals down in an attempt to clear the drains.
  3. Cleaning Out the Trap – If a plunger cannot get the job done, it is time to check the P-trap. To do this, remove as much water as possible from the sink and place a bucket under the trap so you do not make too big of a mess. Now, disconnect the p-trap from the trap arm. If you have an older metal sink assembly, you may need a wrench or pliers to get the Slip Nuts free. Plastic is much easier. Check the trap to see if there is a clog in the curve of the joint. If not, you will need to move on to the final possible fix.
  4. Snaking – If you cannot clear the clog with a plunger and your hands, it may be time for a snake. You can rent one from most hardware stores if you do not own one, and it is a lot cheaper than calling a plumber to do it for you. You will need to remove the trap arm from the drain itself and then run the snake down the line until you find the clog. This can be a time consuming process, but most often it will take care of any remaining clogs.

Tags: , ,
Posted in Kitchen Plumbing, Plumbing, water line | Comments Off